Models > WSES4728F

WSES4728F (00) LG Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: EBG61305805
$73.39
If your appliance isn’t heating or cooling the way it should, this temperature sensor might be the issue. Also known as a thermistor, it helps your appliance stay at the right temperature by working w...
In Stock
Order now and your part arrives by Mar 19
MOTOR,AC FAN – Part Number: EAU62343001
$119.95
In Stock
Order now and your part arrives by Mar 19
THERMOSTAT – Part Number: EBG51439303
$48.36
In Stock
Order now and your part arrives by Mar 19
Thermostat – Part Number: 6930W1A003D
$13.60
In Stock
Order now and your part arrives by Mar 19
Common Nut – Part Number: 1NHB0500032
$13.60
Special Order
SWITCH,TACT – Part Number: EBF60663403
$42.18
Special Order
Shelf – Part Number: MHL49207701
$99.95
In Stock
Order now and your part arrives by Mar 19
Thermostat – Part Number: 6930W1A003K
$13.60
In Stock
Order now and your part arrives by Mar 19
Temperature Sensor – Part Number: EBD51431001
$81.95
In Stock
Order now and your part arrives by Mar 19
Screw,Customized – Part Number: 1SZZW2A004E
$13.60
In Stock
Order now and your part arrives by Mar 19
Customized Washer – Part Number: 1WZZ81N001A
$13.60
Special Order
PACKING,GASKET – Part Number: MFZ40418402
$102.95
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WSES4728F

Viewing 4 of 4
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Barry from PIERRE, SD
Parts Used:
EAU62343001
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More