Models > YKESS907SS00

YKESS907SS00 KitchenAid Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for YKESS907SS00

Viewing 6 of 6

Manuals & Guides for YKESS907SS00

Click to download
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 6 hrs and your part ships today!
$20.58
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order within the next 6 hrs and your part ships today!
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
In Stock
Order within the next 6 hrs and your part ships today!
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts. This part works with the following...
In Stock
Order within the next 6 hrs and your part ships today!
In Stock
Order within the next 6 hrs and your part ships today!
Also known as Thermal cut-off (fuse). This part establishes and maintains the internal temperature of the oven cavity.
In Stock
Order within the next 6 hrs and your part ships today!
This temperature sensor detects the temperature within the oven cavity.
In Stock
Order within the next 6 hrs and your part ships today!
Sold individually.
In Stock
Order within the next 6 hrs and your part ships today!
$7.76
Sold individually.
In Stock
Order within the next 6 hrs and your part ships today!
Also known as a meat probe.
In Stock
Order within the next 6 hrs and your part ships today!
This surface element is for ranges. The surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before insta...
In Stock
Order within the next 6 hrs and your part ships today!
Sold individually.
In Stock
Order within the next 6 hrs and your part ships today!
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for YKESS907SS00

Viewing 10 of 10
Element will not heat
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Little to no heat when broiling
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Will not program
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Joseph from Worthington, PA
  • Parts Used:
    WP9759242
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Self Cleaning blows the thermostat fuse
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.

This repair would have cost $164 through A&E factory service.
132 of 145 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    GEORGE from NEWNAN, GA
  • Parts Used:
    W10823692
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
163 of 247 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Michael from Howell, MI
  • Parts Used:
    W10823692
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Bad Element
Bought new element and installed. Very simple. Used phillips
screw driver.
74 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!