12302 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- ELOISE from MILFORD, OH
- Parts Used:
- WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced filter
pulled old one out , cleaned the area & replaced with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Philadelphia, PA
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
one of the surface burner knobs melted and then cracked
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- deborah from fort pierce, FL
- Parts Used:
- WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old grease filter that I actually did not know I had to change
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Clayton, CA
- Parts Used:
- WP71001641, WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old parts needed replacement
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Aaron from Elkton, MD
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
3 out 4 surface burner knobs were broken
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!
Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.
Also, your site was easy to navigate and find what I was looking for. Many thanks!
Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.
Also, your site was easy to navigate and find what I was looking for. Many thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- marion from aspen, CO
- Parts Used:
- WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My Jenn-Air is an "antique." The filter was disgusting!
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Bell, FL
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stem on the dial split, couldn't turn the burner on
threw out the old and slipped on the new dial....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Warren from Alexandria, VA
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The burner knob brock
Went broke purchasing the very simple part through you PartSelect Appliance Parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roe from Raleigh, NC
- Parts Used:
- WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Falling apart 20 year old grease filter for downdraft counter rangetop
Cleaned out the downdraft cove, inserted the new filter, and put old filter in garbage can. Laughing. Thanks. Wish you had a FAQ's hotline. I'd like to know if the radiant inserts fit the older coil-type models.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Bethesda, MD
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken spindel on knob
took old off, put new knob on, by hand
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy from Ellwood City, PA
- Parts Used:
- WP71001641
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob broke
pulled it off, went to internet to see if I could find.
Did Find. Ordered and replaced.
Did Find. Ordered and replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jill from Potomac, MD
- Parts Used:
- 12001129
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
fan switch broke
I unscrewed the housing unit, pulled out the 2 connectors and here is the hard part, getting the metal washers off the small posts. First I tried needle nose pliers, then I used a rubber mallet to bang it out from the top side far enough to use a reg. hammer to pull it off from the underside. Finally I got it off enough to break the washers with the needle nose pliers. Putting it back together was a breeze,took all of 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Max from Plano, TX
- Parts Used:
- WPY704512
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The right rear burner ignition switch malfunctioned.
Repair is simple as long as you TURN OFF THE CIRCUIT BREAKER first. After that, take off the cover over the switches (pull knobs off, remove 2 screws and lift off the cover), pull the bad switch straight up off the gas valve, pull the two wires off the switch, plug them back onto the new switch, place it back over the gas valve stem, reassimble the cover and knobs, turn back on the circuit breaker, and verify that ignition switch works. Not a hard repair. (HINT: while you are waiting on the replacement part, you can light the bad burner by turning on the opposite burner ignition switch and using that "spark" to light the other burner.)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anaclare from Oak Park, AL
- Parts Used:
- Y712601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One part of the grill burner came detached, caused fire at the connection
I turned off the burner and allowed it to cool. I then checked the website for the part and also got a new grease filter and grill grate. When the parts came, I plugged in the new grill burner, replaced the grill grates, and dropped the filter in place. Total time was about 8 or 10 minutes--most of which was opening the packages. The grill burner is designed so that it can be removed and replaced with a standard 2 burner unit. No tools were needed. I was glad to find the parts for my 17 year old dual-fuel range.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Sacramento, CA
- Parts Used:
- A406
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken exhaust vent cover.
Just removed the broken vent cover.
Injected foaming sealant.
Pushed on the vent cover plate.
Screwed it in place.
More foaming sealant.
Clipped on the flapper and secured the cover.
Injected foaming sealant.
Pushed on the vent cover plate.
Screwed it in place.
More foaming sealant.
Clipped on the flapper and secured the cover.
Was this instruction helpful to you?
Thank you for voting!