Models > 79074333311

79074333311 Kenmore Range

Jump to:

Find Part by Name

Diagrams for 79074333311

Viewing 5 of 5

Most Popular Parts for 79074333311

Viewing 12 of 168

Light Bulb

$19.73

Clear, 120 Volt, 40 Watt.

Temperature Sensor

$47.25

If your oven has little to no heat, is not heating evenly, or is reaching too high a temperature, there may be a problem with your oven probe. This probe, also known as an oven temperature sensor or a...

LP Conversion Kit

$78.59

The LP conversion kit is used in ranges

Oven Rack

$72.72

This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...

Oven Bake Igniter

$127.07

LENS

$10.90

This is a light bulb lens, and it is made for your oven. This part protects the light bulb inside your oven by covering it. The lens is made of glass, and has a 3-inch diameter. Before making this rep...

CAP

$30.43

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges ...

Anti-Tip Kit

$25.88

This is an anti-tip kit for your range. The kit comes with two installation screws, one metal bracket, and instructions. The kit stops your freestanding range from tipping over due to extra weight on ...

Igniter/Orifice Mounting Screw

$12.00

This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...

CAP

$30.82

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Grate Foot Kit

★★★★★

(1)

$79.52

This kit includes 8 rubber feet and adhesive. This surface burner grate pad set is for ranges. Surface burner grate pad set contains the four pads that attach to the bottom of the burner grate to p...

LEVELING LEG ASSY

$5.59

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 79074333311

Viewing 8 of 8

Little to no heat when baking

Gas igniter glows, but will not light

Fixed by these parts

How to fix it

Oven not heating evenly

Element will not heat

Fixed by these parts

How to fix it

Door won’t open after self cleaning cycle

Videos for 79074333311

Viewing 8 of 14

Replacing the Light Bulb

Replacing the Oven Bake Igniter

Replacing the CAP

Replacing the LENS

Replacing the GLASS

Replacing the CAP

Installation Instructions for 79074333311 Provided by Fix customers like you

Viewing 3 of 59

Customer:

Tim from ASHAWAY, RI
Parts Used:
316490000
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

oven did not heat up

Replaced the probe because that's what this site recommended.The oven still does not heat up.

64 of 93 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Paul from Spokane Valley, WA
Parts Used:
316116400
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Oven light receptacle broken - bulb base broke off

Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.

60 of 86 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Richard from Centennial, CO
Parts Used:
5304528973
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Oven wouldn't operated. Error code F9

I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.

52 of 62 people found this instruction helpful.

Was this instruction helpful to you?