Models > 12601(1988)

12601(1988) Kenmore Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 12601(1988)

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
In Stock
This burner grate kit contains two burner grates. Each grate in this kit is black and ten inches long.
No Longer Available
This bracket supports the front and rear burner assembly.
In Stock
$200.69
This front burner assembly is almost nine inches long. It is made of metal.
In Stock
No Longer Available
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Clifton from Redlinds, CA
Parts Used:
WP3801F403-80, 3401X055-09, Y704518, WP705105, 12200030
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
cooktop comes with two burners and a grill. I needed 4 burners.
Never really used the grill and needed 2 more burners so I just pulled out the grill assembly and plugged in the burner assembly, added the new pan cover and new grates and viola, I had a four burner stove. Still can pop the grill back in if needed. Much less expensive than buying a whole new cooktop.
36 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathleen from Centennial, CO
Parts Used:
12200030
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My burner grate needed to be replaced
My husband threw a pot holder on the hot (not lit) burner grate.The potholder melted on the grate and we were not able to remove the melted fabric. We ordered a new grate and it looked so good we ordered three more. I am planning to replace the burners next. We'll have a brand new looking cooktop. The cooktop is 15 years old.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Silver Spring, MD
Parts Used:
WP705105
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
to convert a cook-top stove with 2 burners and a side grill into a 4 burner stove.
Replacing the side grill burners was easy--lift off the grill covers and pull out the grill burners. Next, attach the new front and rear burners to the burner plate with 2 screws (the older version uses 4 screws) using a nutdriver. Place the 2 burner unit (now joined) into the 2 gas inlets (no screws necessary--just slip them over the tub es). Insert the grill pan over the burners and place the 2 burner grates over each burner. Done!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!