Models > 36274221301

36274221301 Kenmore Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Manuals & Guides for 36274221301

Click to download
Keep searches simple, eg. "belt" or "pump".
This genuine OEM part is a top burner spark electrode, also known as a range surface burner igniter. This part is used to create a spark that lights the flame for the surface burner on your gas range....
No Longer Available
In Stock
Order now and your part arrives by Mar 21
This metal burner head delivers 12,000 BTUs of heat and fits under the burner cap on gas ranges and cooktops. Measuring approximately 3.5 inches in diameter, it distributes gas evenly for a consistent...
In Stock
Order now and your part arrives by Mar 21
This genuine small burner is an original replacement part from GE, designed for use with a wide range of gas ranges. Positioned between the rangetop and bracket assembly and the burner cap, it plays a...
In Stock
Order now and your part arrives by Mar 21
This is a replacement cooktop mounting screw, used to secure the burner. If you are missing that screw on your range, this is the part to replace it. This screw is about a half an inch in length and i...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
Sold Individually. This knob can accept a D-shaped shaft.
No Longer Available
$32.91
Size: 8-32 inch Sold individually.
In Stock
Order now and your part arrives by Mar 21

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for 36274221301

Viewing 4 of 4
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Gas smell
Fixed by these parts
Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Glen from Kenner, LA
Parts Used:
WB13K10014
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burner would not lite
openend stove top disconnected wire pushed out old sparker inserted new one closed lid game over
23 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marjorie from Yucca Valley, CA
Parts Used:
WB35X37973
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Pies Boiled Over And Baked On Oven Bottom
Removed the two screws put the heat shield off the old one onto the new one put new bottom in and tightened two screws. Done #38. 69 Cost of part with shipping cost included.
20 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
william from Tampa, FL
Parts Used:
WB28K10025, WB28K10024
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Damaged both front burner tubes.
While i was inserting the new lp,gas orriface to the right rear burner tube I dropped the oriface.Without looking i popped the top of the burner unit, like most older type stoves, and thats when i ran into my problem. I realized the burner tube assemblies are attached by 3 screws to the top cover.Not attached to the cabinet as the older m odels, Basically cracked both front aluminum tubes trying to retrieve the dropped oriface. so i had to replace the burner tube units, which involved removing 3 screws, and loosing up and removal of the nut to the main gas tube. extremely easy repair, next time i`ll try to remember look before i leap,total time to (r+r)burner tubes about 20 minutes.Parts select pulled me out of the fire on this one, great staff and service, with quick delivery.
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!