This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic....

Order now and your part arrives by Mar 19

Terminal Block Kit

$13.60

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and...

Order now and your part arrives by Mar 19

Surface Element - 8 Inch - 220V

$57.07

If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you fi...

Order now and your part arrives by Mar 19

Light Bulb

$26.20

This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM...

Order now and your part arrives by Mar 19

Surface Element - 6 Inch

$35.34

This is a genuine OEM 6-inch burner element for your electric range or cooktop. If the element is no longer heating up, it may be time for a replacement. When you remove the old element, inspect the t...

Order now and your part arrives by Mar 19

6" FM CHROME DRIP B

$18.85

This six-inch drip bowl or drip pan is found underneath the small surface element on your cooktop or range. A similar eight-inch drip bowl also exists, so be sure to check which size you need. The dri...

Order now and your part arrives by Mar 19

Infinite Burner Switch - Small Element - 240V

$59.11

This surface burner switch controls the temperature of the stove top 6-inch surface burner. This switch is 240-volt, 1250-1500 watt, and 5.2-6.25 amp. If your element will not heat and is not defectiv...

Order now and your part arrives by Mar 19

Bottom Panel

$83.49

This is used as the "floor" of the oven cabinet. Note: Does not come with rivets or screws. Must be purchased locally.

Order now and your part arrives by Mar 19

LENS

$24.10

This is a light bulb lens, and it is made for your oven. This part protects the light bulb inside your oven by covering it. The lens is made of glass, and has a 3-inch diameter. Before making this rep...

Order now and your part arrives by Mar 19

Oven Temperature Sensor

$58.09

If your oven isn’t heating properly or cooks unevenly, this temperature sensor might be the fix. It helps your oven stay at the right temperature by sending heat readings to the control board. Made to...

Order now and your part arrives by Mar 19

DRAWER GLIDE

★★★★★

(1)

$16.75

Sold Individually.

Order now and your part arrives by Mar 19

Broil Element

$117.72

This oven broil element provides direct heat from the top of the oven, supporting both broiling and some baking functions. It measures approximately 12 ½" x 18 ½" and is rated for 3000 watts at 240 vo...

Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 79090910402

Viewing 8 of 8

Element will not heat

Fixed by these parts

How to fix it

Little to no heat when baking

Little to no heat when broiling

Fixed by these parts

How to fix it

Oven not heating evenly

Door won’t open after self cleaning cycle

Fixed by these parts

How to fix it

Videos for 79090910402

Viewing 8 of 17

Replacing the Terminal Block Kit

Replacing the Light Bulb

Replacing the Bottom Panel

Replacing the Infinite Burner Switch - Small Element - 240V

Replacing the Surface Element - 8 Inch - 220V

Replacing the Surface Element - 6 Inch

Replacing the DRAWER GLIDE

Replacing the Broil Element

Installation Instructions for 79090910402 Provided by Fix customers like you

Viewing 3 of 148

Customer:: Russell from Lake Havasu, AZ
Parts Used:: 316490001
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

Above 400 beeper went off & code numbers came up on read out

Cut off power at fuse panel. pulled stove out from wall went behind stove removed back panels in area of sensor that I could see from the front side, inside oven. Located sensor from rear & unpluged senser from wiring bundle reached inside oven & removed screws from sensor. Pulled sensor out & threaded wire through hole. Took old & new ... Read more

Read less

78 of 89 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Richard from Centennial, CO
Parts Used:: 5304528973
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Oven wouldn't operated. Error code F9

I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more

Read less

74 of 96 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gerald from Paris, TN
Parts Used:: 316436000
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Switch Was Making A Arcing Sound When Burner Was On

Removed the back cover of the range. Removed the knob from the front of the switch. Removed 2 screws holding switch to range. Removed wires one at a time and connected to proper poles on replacement switch and reinstalled new switch on range

59 of 83 people found this instruction helpful.

Was this instruction helpful to you?