9116048111 Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- rick from NEWNAN, GA
- Parts Used:
- WB49X10192
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Stove igniters not sparking
The spark control module is located in the top section near the clock. Take off the back cover. Use needle nose pliers to disconnect the wires. The modules are marked with letters so connecting the new module is very easy. The range works great. My Kenmore is a 1985 model.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from LAPORTE, PA
- Parts Used:
- WB49X10192
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Gas electric ignition system stopped working
Replaced old ignition module with new module from parts select.
The most important tip was to label each lead before removing from old ignition module.
The most important tip was to label each lead before removing from old ignition module.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- frank from steger, IL
- Parts Used:
- WB2X9018
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Oven would not light
Unplugged from wall. turned off gas. removed broiler. removed burner assy. removed cover for electicial panel. unplugged igniter from electicial panel. removed screw for igniter from burner& installed new one.
Was this instruction helpful to you?
Thank you for voting!