Models > 9116048111

9116048111 Kenmore Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WB1X1130
$14.65
Sold Individually.
In Stock
Order now and your part arrives by Mar 19
Screw – Part Number: WB1X1118
$14.65
Special Order
Screw – Part Number: WB1K5191
$14.65
In Stock
Order now and your part arrives by Mar 19
IGNITER – Part Number: WB2X9005
No Longer Available
SPARK MODULE KIT – Part Number: WB49X10192
No Longer Available
Screw – Part Number: WB1X1425
$14.65
Special Order
SWITCH-THERM – Part Number: WB24X411
No Longer Available
CLIP-THERMO – Part Number: WB2X9027
No Longer Available
SWITCH-Igniter – Part Number: WB24X412
$61.15
Special Order
IGNITER – Part Number: WB2X9018
No Longer Available
SHIELD-VALVE – Part Number: WB2X9488
$40.12
Special Order
PILOT – Part Number: WB2X9015
$57.07
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
rick from NEWNAN, GA
Parts Used:
WB49X10192
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Stove igniters not sparking
The spark control module is located in the top section near the clock. Take off the back cover. Use needle nose pliers to disconnect the wires. The modules are marked with letters so connecting the new module is very easy. The range works great. My Kenmore is a 1985 model.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from LAPORTE, PA
Parts Used:
WB49X10192
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Gas electric ignition system stopped working
Replaced old ignition module with new module from parts select.
The most important tip was to label each lead before removing from old ignition module.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
frank from steger, IL
Parts Used:
WB2X9018
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Oven would not light
Unplugged from wall. turned off gas. removed broiler. removed burner assy. removed cover for electicial panel. unplugged igniter from electicial panel. removed screw for igniter from burner& installed new one.
Was this instruction helpful to you?
Thank you for voting!
View More