Models > 66121

66121 ((1988)) Kenmore Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter with Wire Harness and Bracket – Part Number: WB2X10016
$207.88
This igniter is lighted by the spark switch to produce a flame to ignite the oven.
In Stock
UNKNOWN – Part Number: WB62X1641
No Longer Available
UNKNOWN – Part Number: WB21X5277
$231.15
Special Order
SHIELD-PANEL – Part Number: WB56X1887
$81.55
Special Order
PANEL-BROILER-ALMOND – Part Number: WB56X1778
$108.73
Special Order
BURNER BOX – Part Number: WB56X1780
No Longer Available
DISCONTINUED – Part Number: WB21X490
No Longer Available
VALVE TOP (2 POS) – Part Number: WB21X5289
No Longer Available
PLUG-FRONT FRAME – Part Number: WB2X10119
$10.41
Special Order
UNKNOWN – Part Number: WB62X1642
No Longer Available
PNL SIDE RT AD – Part Number: WB63X5218
No Longer Available
DISCONTINUED – Part Number: WB2X4963
$25.04
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 66121

Viewing 1 of 1
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Maurice from Overland Park, KS
Parts Used:
WB2X10016
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GENE from HEBRON, OH
Parts Used:
WB2X10016
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Flanders, NJ
Parts Used:
WB2X10016
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven Igniter DEAD
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Read less
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More