Models > A125W

A125W Jenn-Air Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for A125W

Viewing 1 of 1
Glass Cartridge Diagram and Parts List for Jenn-Air Range
Glass Cartridge
Keep searches simple, eg. "belt" or "pump".
Burner Element - Right Front – Part Number: W10823698
$132.48
This surface element is for ranges. The surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before insta...
In Stock
Order now and your part arrives by Mar 19
Refrigerator Screw – Part Number: WP488234
$8.35
This screw is sold individually. Size: 8-32 x 1/4 inch.
Special Order
ELMNT-SURF – Part Number: W10823702
$134.56
In Stock
Order now and your part arrives by Mar 19
Range Terminal Block Insulator – Part Number: 708834
$24.10
This part fits inside your range's terminal block to act as an insulator for the contact spade.
In Stock
Order now and your part arrives by Mar 19
Refrigerator Screw – Part Number: WP12990527
$7.98
In Stock
Order now and your part arrives by Mar 19
WIRE – Part Number: 5112P328-60
No Longer Available
CLAMP – Part Number: 708910
$8.35
Special Order
BLOCK TERMINAL – Part Number: 708730
No Longer Available
SPADE – Part Number: 708572
No Longer Available
SCREW – Part Number: 707113
No Longer Available
BRACKET – Part Number: 700648
$36.00
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for A125W

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Replacing the Burner Element - Right Front

Replacing the Burner Element - Right Front

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
paul from trumbull, CT
Parts Used:
W10823698
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
No heat on burner
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one.
35 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from Henderson, NC
Parts Used:
W10823702
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Read less
25 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Daytona Beach, FL
Parts Used:
W10823698
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Defective Surface Burner Element - 1800W
First discount Ac from wall, then take out 2 screws on the front of the range top and lift up the top of the range surface, then while holding up the surface top take out the front burner and replaced new burner element.Let the surface top down and screw in the two screws. the surface top of the range is hinged so it would be good to hav e someone to hold the top up while you replace the element or use a piece of wood to hold it up,this is a piece of cake to repair. would like to thank parts select for their service. I have ordered from them before and they back up their products
Robert
Read less
23 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More