Models
>
AG202MG12
AG202MG12 Jenn-Air Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AG202MG12
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
$5.42
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
$202.45
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
In Stock
This black front burner assembly is nine inches long. It is used with Maytag brand gas ranges.
In Stock
In Stock
In Stock
$105.53
This burner grate is eleven and a half inches long. It is all black in color and is made of an iron/metal material.
In Stock
This includes 2 medium-sized burner grates. NOTE: The manufacturer has changed the color. It is recommended to replace both grates so the color will match.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for AG202MG12
Viewing 3 of 3Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- thomas from Goodrich, TX
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
20 year old burners were slow to light and hard to adjust for our propane fired stove. And, they were scratched and ugly
Removed four screws; withdrew two burners; set two new burners in place; installed same old screws. That was it. When I turned them on to adjust the flame, they came on almost instantly and no adjustment was needed.
Wife loves the nice new look.
Wife loves the nice new look.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from HOLLISTON, MA
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Part arrived broken.
Contacted customer service via email. Included a description of the problem as well as a photo that clearly showed that the Front Burner Assembly was, in fact, NOT an assembly when it arrived.
Nobody even acknowledged my email.
This was a $140 assembly.
Never again will use these guys for repair parts.
Nobody even acknowledged my email.
This was a $140 assembly.
Never again will use these guys for repair parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from BOLIVAR, TN
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Front burner wouldn't light because hole burned in metal tube that channelled gas to burner
So very easy!!!! I'm a 70 year old grandmother with a small socket set - and that's all I needed! Removed one small screw, removed old burner, popped new burner in, replaced one screw, and back in business! Placed order, received it in 2 days, fixed burner. So much faster than calling a repairman!
Was this instruction helpful to you?
Thank you for voting!