Models > SVD48600P

SVD48600P Jenn-Air Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SVD48600P

Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and uns...
In Stock
Order within the next 11 hrs and your part ships today!
$29.94
This part is an authentic OEM replacement grease filter for your range or cooktop. The grease filter is used to trap particles that result from cooking such as grease, smoke, and dust. The filter is v...
In Stock
Order within the next 11 hrs and your part ships today!
This is a factory-certified oven sensor kit with two harness adapters. Its purpose is to sense the temperature inside the oven. Replacing this part can fix an oven that is not reaching the proper temp...
In Stock
Order within the next 11 hrs and your part ships today!
$20.79
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order within the next 11 hrs and your part ships today!
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order within the next 11 hrs and your part ships today!
This door strike is less than an inch long. It is all white in color and it is made entirely of plastic.
In Stock
Order within the next 11 hrs and your part ships today!
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
In Stock
Order within the next 11 hrs and your part ships today!
This gas valve knob measures approximately 2 12 inches in diameter. It is a black knob that has white lettering aroud its perimeter denoting the different temperature levels: low, medium, high, etc. T...
Special Order
This black front burner assembly is nine inches long. It is used with Maytag brand gas ranges.
In Stock
Order within the next 11 hrs and your part ships today!
The element has male terminals. This bake element is found on the bottom of the oven.
In Stock
Order within the next 11 hrs and your part ships today!
$290.32
This black burner head has a glossy finish.
Special Order
The top of this part is now black.
In Stock
Order within the next 11 hrs and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for SVD48600P

Viewing 11 of 11
Little to no heat when baking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing
How to fix it
Will not program
Fixed by these parts
Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Gene from Washington C.H., OH
  • Parts Used:
    WP71002111
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Replace Grease Filter
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.
524 of 537 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    David from Westford, MA
  • Parts Used:
    12001656
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
154 of 192 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Marie from New Smyrna Bch, FL
  • Parts Used:
    WP71002111
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Needed to replace filter
Just placed it at the filter location. Liked the ring feature on the filter for ease of removal for cleaning. My previous ones didn't have such feature. Thank you for filling my order. I bought an extra filter for the future. I'm a big user of my Jenn-Air range. I may soon be needing to replace my griddle. Will be contacting your company then.
98 of 162 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!