Models > JGD3536GB05

JGD3536GB05 Jenn-Air Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Downdraft Grease Filter – Part Number: W10905834
$29.82
This grease filter traps cooking grease from the vent system to protect internal parts and maintain airflow. It’s black, measures about 7 by 4 inches, and installs easily without tools. Replace it if ...
In Stock
Order now and your part arrives by Mar 19
REGULATOR – Part Number: W11087445
$132.27
In Stock
Order now and your part arrives by Mar 19
Cooktop Mounting Bracket & Screw – Part Number: 8186533
$49.39
Special Order
CAP-BURNER – Part Number: W11379294
$114.95
In Stock
Order now and your part arrives by Mar 19
Access Cover – Part Number: W10837737
$50.42
On Order
SWITCH-ROTARY,GAS – Part Number: W11676792
$45.27
In Stock
Order now and your part arrives by Mar 19
PLENUM-AIR – Part Number: W10837738
$118.95
Special Order
Motor Blower – Part Number: W11083804
$270.00
This downdraft ventilation blower motor assembly is designed to restore proper airflow in cooktops equipped with downdraft venting. It helps remove smoke, steam, heat, and cooking odors while reducing...
In Stock
Order now and your part arrives by Mar 19
MODULE-SPK – Part Number: WPW10475150
$151.26
In Stock
Order now and your part arrives by Mar 19
TRAY-DRIP – Part Number: W10235990
$57.07
Special Order
ORIFICE-1.00,5KBTU/HR TYPE 2 – Part Number: W11677633
$51.97
In Stock
Order now and your part arrives by Mar 19
SCREW – Part Number: W11241230
$20.95
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Charles from Buena Park, CA
Parts Used:
W11087445
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the o ld unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Read less
2 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More