Models > JDR8895AAS

JDR8895AAS Jenn-Air Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JDR8895AAS

Viewing 8 of 8

Manuals & Guides for JDR8895AAS

Click to download
Keep searches simple, eg. "belt" or "pump".
The bake element found in the bottom of your oven provides most of the heat when cooking your food. If your oven is not coming up to temperature, heats unevenly, or is not heating at all, there may be...
In Stock
$32.58
This is a genuine OEM replacement burner knob for your range. The knobs are used to turn the burner elements on and off, and to adjust the temperature of the burner. If a knob has become broken or str...
In Stock
This is a factory-certified oven sensor kit with two harness adapters. Its purpose is to sense the temperature inside the oven. Replacing this part can fix an oven that is not reaching the proper temp...
In Stock
This part includes one range leveling leg, sourced directly from the original manufacturer. The leveling leg is what supports the range and ensures it is sitting level, stable, and at the proper heigh...
In Stock
$13.28
Sold individually.
In Stock
$14.11
Sold individually. Must be held in with adhesive.
In Stock
$90.79
This is an oven rack for your range. It is a stable surface for your cookware to sit when baking and broiling. It measures to be roughly 23 inches wide and 16 inches long. It is made of durable metal ...
In Stock
This broil element is found on the roof of the oven.
In Stock
$20.83
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
This part helps your burner ignite and produce flame.
In Stock
$87.39
This oven door gasket comes with built in retaining clips.
In Stock
This bake element is found on the bottom of the oven.
In Stock

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daryl
November 26, 2021
How do I remove the top of stove to access burner controls? I need to change out 5 device harness. Thank you
For model number JDR8895AAS
Fix.com logo
Hello Daryl, Thank you for the question. Here is a repair story left by a previous customer. "You will need a #2 phillips screwdriver and two open end wrenches, 1/2" and 5/8" AFTER unplugging the power cord AND turning OFF the gas feed: 1-Remove seven phillips head screws from largest rear panel, and remove panel. 2-Disconnect the gas feedline from the manifold with 5/8" open end wrench. 3-Unplug switch "set" ( 2 connectors, one inline and one spade) 4-Open top oven door and remove two hexhead/phillips screws from underside of stovetop, located on far right and far left forward corners. 5-Pull stovetop forward to unlatch from rear holddown clips on frame. 6-Lift stovetop up enough to disconnect five gas burner supply lines from control valves with 1/2" open end wrench. 7-Remove two phillips head manifold attaching screws from topside of control valves (visible after pulling off control valve knobs)...manifold is now free, remove from stove. 8-"Pop off" switches from control valves, and snap new set into place. 9-Install drip shield disks on control valve shafts. 10-Reverse procedure to reassemble stove. NOTES: 1-Remember to install drip shield disks on control valve shafts before reattaching manifold to stovetop. 2-Check all visible screws for tightness now that the covers are removed, ....you WILL find loose screws...Avoid overtightening/stripping screw holes." We hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
February 21, 2024
Top oven door will not stay closed. How do I fix this.
For model number JDR8895AAS
Fix.com logo
Hello Mike, thank you for contacting us. According to our research, the issue is most probably with the door hinges. We would recommend checking the hinges and replace the faulty one. The door hinge for your model is part number FIX2088468. It is sold individually. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for JDR8895AAS

Viewing 11 of 11
Little to no heat when baking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing
How to fix it
Will not program
Fixed by these parts
Fixing
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from Westford, MA
Parts Used:
12001656
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
157 of 198 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Todd from San Antonio, TX
Parts Used:
W10201551
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Upper broiler element (of upper over) burnt out
This particular model has a bracket that holds the element close to the oven ceiling, so I had to unscrew that as well as the element mounting screws on the back oven wall. The hardest part (not that hard) was the connectors were really tightly clamped to the element terminal. I had to use pliers to help wiggle them off the tips. Recom mend doing this very gently yet firmly - I was worried about ruining the connectors or the wires to the oven. The element was deader than dead and actually fell apart in three places once it was detached. The new replacement element arrived a couple days later. Putting it in was a breeze, although the oven is quite dark and I needed Mrs. Handyman to hold a flashlight so I could get the screws in. Oven works fine now.
79 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
charles from marstons mills, MA
Parts Used:
12001656
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
F1-1 code
First I removed the two screws that hold the element in place. I then pulled the sensor out about 3 inches and disconnected the two wires. Next, I connected new sensor and screwed the new sensor back in place. One area for caution. Make sure that the electrical connection is pushed in past the insulation on the back side of the oven. Fa ilure to do so will cause the plastic plug connector to melt from oven heat.
75 of 100 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!