Models > A105-J

A105-J Jenn-Air Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
In Stock
Order within the next 12 hrs and your part ships today!
This screw is well under an inch long, and is made of metal.
Special Order
$9.13
This screw is sold individually. Size: 8-32 x 1/4 inch.
Special Order
This part fits inside your range's terminal block to act as an insulator for the contact spade.
Special Order
Sold individually.
In Stock
Order within the next 12 hrs and your part ships today!
Sold individually.
In Stock
Order within the next 12 hrs and your part ships today!
This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.
No Longer Available
No Longer Available
This element comes with a chrome trim ring.
No Longer Available
8" Trim Ring - Black - has been discontinued.
No Longer Available
The temperature of this element will rise gradually and evenly while heating up.
No Longer Available
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for A105-J

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Daryl from Olathe, KS
Parts Used:
Y708572
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
cook top module would not heat.
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black. When the contact spades arrived, I replaced the contact spades and reassembled the module. It now works and looks like it did when it was new.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sonny from MOUNT VERNON, GA
Parts Used:
Y708572
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
A local repair shop informed the individual that the burner unit could not be repaired and she would have to replace the cooktop..
After examining the burner unit I noticed that one of the male contact spades was burned and look deformed. After removing the spade I discovered that it had been originally manufactured incorrectly. I went on line to try and find the part. I found it at this site . I ordered 2 of the spades and replaced the deformed spade and anothe r one that looked like it had gotten a little hot. She tried the unit and it worked perfectly. She had not used that burner unit for a very lengthy time. The investigation of the problem took a little time, but the repair went very fast. Moral is :" If a spade doesn't look right, it probably isn't", but either the individual spade or plug can be replaced. This site is now my "GO TO" place for parts.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin Gardens Date Farm from Yuma, AZ
Parts Used:
Y703850
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
burn element
pull the cartrige out of the stove and change the element
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!