Models
>
RGB746GEJ3
RGB746GEJ3 Hotpoint Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RGB746GEJ3
Viewing 4 of 4Keep searches simple, eg. "belt" or "pump".
$30.07
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. T...
In Stock
Order within the next 4 hrs and your part ships today!
In Stock
Order within the next 4 hrs and your part ships today!
This igniter is lighted by the spark switch to produce a flame to ignite the oven.
In Stock
Order within the next 4 hrs and your part ships today!
This part creates the spark that lights the gas and starts the burners.
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
This drawer glide is sold individually. It may not resemble the original glide, but it will fit and function the same.
No Longer Available
This drawer glide is located in the lower drawer section of the oven.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RGB746GEJ3
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Maurice from Overland Park, KS
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GENE from HEBRON, OH
- Parts Used:
- WB2X10016
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Avon, OH
- Parts Used:
- WB32X90
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing old drip pans
Our very old GE gas stove looked good except for the drip pans. I ordered all four and they arrived the next day. The price for the pans was very reasonable, and of course, they were very easy to replace. My wife looked at the stove and said the stove looked new. I love those inexpensive jobs that result in a good looking finished pro
... Read more
ject.
Read less
Was this instruction helpful to you?
Thank you for voting!