Models > REP306AOW

REP306AOW Gibson Range

Jump to:

Find Part by Name

Most Popular Parts for REP306AOW

Terminal Block Kit

$13.60

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and...

Order now and your part arrives by Mar 19

Surface Element - 8 Inch - 2600W

$37.03

The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it sho...

Order now and your part arrives by Mar 19

Bake Element - 240V

$38.06

If your oven has little to no heat, there may be an issue with the bake element. The bake element is found in the bottom of the oven cavity and is used to supply the heat used for cooking and baking. ...

Order now and your part arrives by Mar 19

6-Inch Coil Burner Element

★★★★★

(2)

$27.75

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits m...

Order now and your part arrives by Mar 19

Broil Element

$127.78

This fully open fixed oven broil element carries 240 volts and 2750 watts.

Order now and your part arrives by Mar 19

HINGE

$72.37

GLASS-OVEN DOOR

SWITCH

$162.95

KNOB

$51.97

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for REP306AOW

Viewing 6 of 6

Element will not heat

Fixed by these parts

How to fix it

Little to no heat when baking

Oven not heating evenly

Little to no heat when broiling

Fixed by these parts

How to fix it

Videos for REP306AOW

Viewing 3 of 3

Replacing the Terminal Block Kit

Replacing the Surface Element - 8 Inch - 2600W

Replacing the 6-Inch Coil Burner Element

Installation Instructions for REP306AOW Provided by Fix customers like you

Viewing 3 of 224

Customer:: Christopher from North Salt Lake, UT
Parts Used:: 5303051519
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Baking Heating Element Burned Up

Used a screw driver with a socket head to remove the two hex head screws holding the old element. Pulled the old element forward until the two wire attachements were visable. The wires were attached with a simple tab connector. Removed the wires from the element. Attached wires to new element slide the element and wires back into wall of ... Read more

Read less

193 of 202 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: joseph from washington, PA
Parts Used:: 5303051519
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

blown bake element

Removed the two screws that hold the element in place at the rear of the oven.Unplug each prob,you may need pliers as they can be a little tight.Reconnected the new element.Keep the old screws.New element does not come with screws.Always unplug range when doing repairs.

59 of 62 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from Encinitas, CA
Parts Used:: 5303935058, 316442301
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

burner shorted out

I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.

61 of 75 people found this instruction helpful.

Was this instruction helpful to you?