Models > 108RB646H

108RB646H General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6 Inch – Part Number: WB32X10012
$11.33
If the drip bowls on your range or cooktop have become damaged, rusty, or are missing, they should be replaced. This is a genuine OEM replacement drip bowl that is chrome in color and 6 inches in diam...
In Stock
Order within the next 12 hrs and your part ships today!
Drip Bowl - 8 Inch – Part Number: WB32X10013
$17.90
This 8-inch chrome drip bowl is a genuine OEM replacement part for your electric range. The drip bowl is designed to fit underneath the coiled burner elements, and is used to catch spills that result ...
In Stock
Order within the next 12 hrs and your part ships today!
INFINITE HEAT SWITCH KIT – Part Number: WB21X36771
$51.36
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
In Stock
Order within the next 12 hrs and your part ships today!
Broiler Pan - Large – Part Number: WB48X10056
$30.07
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. T...
In Stock
Order within the next 12 hrs and your part ships today!
Tilt Lock Hinge Mounted Surface Burner Kit - 6" – Part Number: WB30X342
$49.45
This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
In Stock
Order within the next 12 hrs and your part ships today!
Tilt Lock Hinge Mounted Surface Burner Kit - 8 Inch – Part Number: WB30X341
$83.46
This tilt lock hinge mounted surface element kit includes an 8 inch element, three wire, 2450 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come...
In Stock
Order within the next 12 hrs and your part ships today!
Bake Element – Part Number: WB44X5043
$65.15
In Stock
Order within the next 12 hrs and your part ships today!
Silicone Door Gasket – Part Number: WB2X5103
This gasket seals the oven/range door.
No Longer Available
Power Terminal Block Kit – Part Number: WB17X5095
$74.64
This kit comes with the terminal block, nuts and wires.
In Stock
Order within the next 12 hrs and your part ships today!
Selector Switch – Part Number: WB22X5134
No Longer Available
DISCONTINUED – Part Number: WB24K2
No Longer Available
RECEPTACLE – Part Number: WB8X191
$20.97
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 108RB646H

Viewing 2 of 2
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ernest from Bellevue, NE
Parts Used:
WB21X36771
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Large burner would operate on high setting only.
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Los Alamos, NM
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
The oven's bottom bake element burned up
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the oven. I flipped the breaker switch back on, and turned on the oven. I was done in roughly 15 minutes. The most difficult part was having to shine a flash light into the oven to replace the part, and negotiating the hard cold kitchen floor.
Read less
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Kiowa, CO
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
The oven element burned completely into.
I first removed the two screws holding the element in place. Then I pulled the element out about 2 or 3 inches and then took out the 2 small screws holding the 2 wires in place. I then removed the old element and discarded it and installed the new one in the reverse order that I took out the old one. It was quite easy to do, only took abo ut 10 to 15 minutes total time.
Read less
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More