Models > J320*01

J320*01 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bake Element – Part Number: WB44X5099
$82.73
This closed hinged-style bake element has screw in terminals.
In Stock
Order within the next 8 hrs and your part ships today!
Tilt Lock Hinge Mounted Surface Burner Kit - 6" – Part Number: WB30X342
$49.45
This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
In Stock
Order within the next 8 hrs and your part ships today!
Broil Element Kit – Part Number: WB44X134
$39.69
This element has screw on terminals.
In Stock
Order within the next 8 hrs and your part ships today!
Tilt Lock Hinge Mounted Surface Burner Kit - 8 Inch – Part Number: WB30X341
$83.46
This tilt lock hinge mounted surface element kit includes an 8 inch element, three wire, 2450 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come...
In Stock
Order within the next 8 hrs and your part ships today!
Thermostat – Part Number: WB21X5209
The length of this thermostat's capillary is 62 inches.
No Longer Available
UNIT SWITCH – Part Number: WB23X33
$190.18
In Stock
Order within the next 8 hrs and your part ships today!
DISCONTINUED – Part Number: WB19X141
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for J320*01

Viewing 6 of 6
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Carlos from Southaven, MS
Parts Used:
WB44X5099
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
The lower bake element burned out.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo d job folks!
Read less
67 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip from Greeneville, TN
Parts Used:
WB44X5099
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Replaced lower element in GE Spectra range.
Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!
22 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Baton Rouge, LA
Parts Used:
WB44X5099
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Old element burned through. Sparks were flying!
Turned off power at breaker panel. Removed 2 screws attaching element to stove. Pulled element out a couple of inches and removed 2 wires attached with screws. Installation is reverse order of removal.
Be careful not to twist the terminal ends when tightening screws.

shipping was very fast!
18 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More