Models > J486A2WH

J486A2WH General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Trim Ring - 6 Inch – Part Number: WB31X5013
$13.95
This trim ring is an authentic OEM replacement part for your range. It serves as a decorative trim to the drip bowls found under the burner elements. The part will need to be replaced if it has become...
In Stock
Order now and your part arrives by Jul 5
Trim Ring - 8 Inch – Part Number: WB31X5014
$17.44
This 8-inch trim ring is a genuine OEM replacement part for your range. It sits around the surface burner elements for the style of ranges with low rise tilt lock burners. You may need to replace the ...
In Stock
Order now and your part arrives by Jul 5
Broiler Pan - Large – Part Number: WB48X10056
$43.92
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. T...
In Stock
Order now and your part arrives by Jul 5
Tilt Lock Hinge Mounted Surface Burner Kit - 6" – Part Number: WB30X342
$54.95
This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
In Stock
Order now and your part arrives by Jul 5
Tilt Lock Hinge Mounted Surface Burner Kit - 8 Inch – Part Number: WB30X341
$60.95
This tilt lock hinge mounted surface element kit includes an 8 inch element, three wire, 2450 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come...
In Stock
Order now and your part arrives by Jul 5
Bake Element – Part Number: WB44X196
$81.17
This bake element has screw-on terminals.
In Stock
Order now and your part arrives by Jul 5
Clock Knob Kit - 3 Pack - Chrome – Part Number: WB3X459
No Longer Available
Thermostat – Part Number: WB21X5209
The length of this thermostat's capillary is 62 inches.
No Longer Available
8" Multi Temperature Element Kit - 2500W – Part Number: WB30X357
Hardware included.
No Longer Available
DISCONTINUED – Part Number: WB24K2
No Longer Available
Oven Sensor – Part Number: WB21X5207
This sensor is used for later gas range models and has yellow leads. It offers 17.5 ohms of resistance and you can use it with a responder. This oven sensor is suitable for use with many of GE's brand...
No Longer Available
UNIT 2500W – Part Number: WB44X136
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for J486A2WH

Viewing 2 of 2
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 8 Inch

Replacing the Trim Ring - 8 Inch

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from GOFFSTOWN, NH
Parts Used:
WB30X341
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Old large 8" stove burner had burnt out, needed replace
Simply took the replacement part ( PS244040, GE WB30X341) and did the quick direct swap using all the new pieces in the burner kit. UNPLUG the stove. Undo the titl arm screw, remove the plastic wire isolation block (2 spring clips), unscrew the 3 wires to the elements, screw the 3 wires to the new element, put in new bakelite wire isolati on block with spring clips to keep the wires seperated, mount and titghten the tilt arm screw. Make sure the burner sits even and flat in the stove top. Plug the stove back in and test.
Read less
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doris from Redwood City, CA
Parts Used:
WB3X459
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
timer knobs missing
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.

Two of the knobs fit perfectly.

The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
5 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
vanessa from DARBY, PA
Parts Used:
WB44X196
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
heating element went out
replace with new one
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More