Models > GRCP3650SM-2

GRCP3650SM-2 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GRCP3650SM-2

Viewing 5 of 5
CHASSIS Diagram and Parts List for General Electric Range
CHASSIS
CONTROL PANEL Diagram and Parts List for General Electric Range
CONTROL PANEL
CONVECTION MOTOR Diagram and Parts List for General Electric Range
CONVECTION MOTOR
COOKTOP GROUP Diagram and Parts List for General Electric Range
COOKTOP GROUP
DOOR ASSEMBLY Diagram and Parts List for General Electric Range
DOOR ASSEMBLY
Keep searches simple, eg. "belt" or "pump".
Light Cover – Part Number: WB36X192
$23.05
In Stock
Order now and your part arrives by Mar 23
Bottom Trim - White – Part Number: WB07K10250
$28.79
Screws not included.
In Stock
Order now and your part arrives by Mar 23
Door Handle – Part Number: WB15X10047
$87.95
Replace your broken or missing oven door handle with this black plastic version, measuring 30" long and 1.5" wide. It attaches to the oven door for easy opening and is sold individually. Direct from t...
In Stock
Order now and your part arrives by Mar 23
Washer - 12 Pack – Part Number: WB1X119D
$22.00
In Stock
Order now and your part arrives by Mar 23
Inner Door Glass – Part Number: WB36X5712
This inner door glass is sold individually.
No Longer Available
Leveling Leg – Part Number: WB2X8248
No Longer Available
ELEMENT CONVEX – Part Number: WB44T10027
No Longer Available
End Cap - White - Right Side – Part Number: WB7X7187
No Longer Available
RETAINER – Part Number: WB2X2030
$27.76
Special Order
CLIP WINDOW – Part Number: WB2X8320
$14.65
Special Order
DISCONTINUED – Part Number: WB7X7344
No Longer Available
BAKE ELEMENT CONVECTION – Part Number: WB44M169
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
william from new orleans, LA
Parts Used:
WB15X10047
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
the oven handle broke during delivery
I remove the damage handle from the oven door,Then i install the new door handle with no problem.The tools i used was a hand nut driver and a phillip #3driver.
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from EDISON, NJ
Parts Used:
WB36X5712
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
broken inner glass
I removed the oven door by unlocking the hinges and pulling out. Set on workbench (with towel/pad) and removed handle, four screws, then bottom and inside panel screws, then one nut to finally be able to get at the inner glass insert. Removed insulation and then took an extra hour to really clean all surfaces (middle glass was quite gre asy due to inner glass being broken for a while. Reassembly wasn't bad, but took a while to figure out that the two thin 2" red spacers belonged around the two handle screws. This was tough to figure out as they come off when taking the handle off, but you can't see them, so didn't know where they came from! Anyway, if you're just a bit handy, you can do this job.
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robin from Apple Valley, MN
Parts Used:
WB07K10250
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
bottom trim had rusted, so we needed new piece
Removed oven door (made sure hinges were locked open and stayed open). Remove part on top of trim, removed rusted trim and replaced with new trim. Replaced part on top of trim and screwed all back together. Put oven door back on and unlocked hinges. It was easier than the trial run (when I hadn't realized that the hinges weren't locked op en!)
Read less
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More