Models > CCGS990SET3SS

CCGS990SET3SS General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for CCGS990SET3SS

Viewing 9 of 9
CABINET Diagram and Parts List for General Electric Range
CABINET
CONTROL PANEL & COOKTOP Diagram and Parts List for General Electric Range
CONTROL PANEL & COOKTOP
GAS & BURNER PARTS Diagram and Parts List for General Electric Range
GAS & BURNER PARTS
LOWER CHASSIS Diagram and Parts List for General Electric Range
LOWER CHASSIS
LOWER DOOR Diagram and Parts List for General Electric Range
LOWER DOOR
MINI MANUAL Diagram and Parts List for General Electric Range
MINI MANUAL
UPPER CHASSIS Diagram and Parts List for General Electric Range
UPPER CHASSIS
UPPER DOOR ASM Diagram and Parts List for General Electric Range
UPPER DOOR ASM
USE & CARE MANUAL Diagram and Parts List for General Electric Range
USE & CARE MANUAL
Keep searches simple, eg. "belt" or "pump".
Door Bumper - Black – Part Number: WB2K15
$15.70
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Burner Cap - Black - Medium - 9500 BTU – Part Number: WB29K10023
$36.00
The burner cap is used on your gas range to cover the burner heads. This genuine OEM replacement part is black in color and measures approximately 3 inches in diameter. The purpose of the burner cap i...
In Stock
Order now and your part arrives by Mar 19
Burner Cap - 15K – Part Number: WB28K10222
$45.27
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
In Stock
Order now and your part arrives by Mar 19
Burner Cap - 5000 BTU - Black – Part Number: WB29K10022
$23.05
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is th...
In Stock
Order now and your part arrives by Mar 19
Burner Head - Medium - 9500 – Part Number: WB16K10055
$51.45
In Stock
Order now and your part arrives by Mar 19
Burner Knob – Part Number: WB03K10265
$75.43
This knob accepts a D-shaped shaft. Sold individually. NOTE: The manufacturer has updated this knob. It may be smaller than the original but will function the same.
In Stock
Order now and your part arrives by Mar 19
Knob Dial Skirt – Part Number: WB04K10037
$28.79
This is the part that's under the knob. The knob is sold separately.
In Stock
Order now and your part arrives by Mar 19
Meat Probe Thermistor – Part Number: WB20T10024
$58.09
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
In Stock
Order now and your part arrives by Mar 19
Top Electrode Mounting Clip – Part Number: WB01K10112
$17.80
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing th...
In Stock
Order now and your part arrives by Mar 19
Oven Light Housing – Part Number: WB08T10002
$37.03
Must buy bulb locally as per manufacturer.
In Stock
Order now and your part arrives by Mar 19
Ignitor Mounting Screw – Part Number: WB1X1293
$14.65
Sold Individually.
In Stock
Order now and your part arrives by Mar 19
Vision Burner - Extra Large – Part Number: WB16K10062
$70.33
This is a replacement vision burner or surface burner head for your gas range. It is silver in color and approximately 4.5 inches in diameter. This burner is sold individually. The burner head distrib...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for CCGS990SET3SS

Viewing 6 of 6
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Will not program
Fixed by these parts
Fixing
How to fix it
Replacing the Oven Light Housing

Replacing the Oven Light Housing

Replacing the Burner Head - Medium - 9500

Replacing the Burner Head - Medium - 9500

Replacing the Burner Cap - 5000 BTU - Black

Replacing the Burner Cap - 5000 BTU - Black

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jack from Okmulgee, OK
Parts Used:
WB08T10002
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from SAYREVILLE, NJ
Parts Used:
WB13K10043
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Bottom oven wouldn't warm up
Remove the door for easier access. Remove the fan cover from the back of the oven (about 6 Phillips head screws). Remove the bottom cover (2 5/16" screws). Lift the cover from the back and slide out. Remove the old igniter (2 5/16" screws). Pull the oven away from the wall. Remove back cover (3 5/16" screws). Unplug igniter, feed wiring t hrough the oven. Install new igniter.
Read less
17 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Monroe, NY
Parts Used:
WB13K10003
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Range Top Burners would not ignite
Here's how I fixed my problem.
I took the aluminum cover, the part that sits over the jet & the igniter, which simply comes off. It's the part that the igniter discharges to. I took this cover off & using a pencil I scratched the lead of the pencil into the area
which is around the igniter. I made sure to cover the area wit h as much lead as I could get on it. You need to make sure that you do this to all four burners. The only care you need to take, is not to block the gas jet which is in the igniter recess. It's been about 3 weeks since I added this & the burners click loudly & have lit without a problem. It appears that the aluminum may develop a coating on it of some kind which is highly resistive.
Read less
17 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More