Models > J37SWK-1

J37SWK-1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for J37SWK-1

Viewing 4 of 4
BACKGUARD Diagram and Parts List for General Electric Range
BACKGUARD
CHASSIS Diagram and Parts List for General Electric Range
CHASSIS
DOOR ASSEMBLY Diagram and Parts List for General Electric Range
DOOR ASSEMBLY
DRAWER GROUP Diagram and Parts List for General Electric Range
DRAWER GROUP
Keep searches simple, eg. "belt" or "pump".
Meat Probe Thermistor – Part Number: WB20T10024
$60.49
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
In Stock
Order now and your part arrives by Jul 12
Fluorescent Lamp/Bulb – Part Number: F26T8-CW-4
No Longer Available
Oven Sensor – Part Number: WB21X158
This sensor offers 16 ohms of resistance at room temperature, though the resistance increases as the temperature increases.
No Longer Available
Leveling Leg – Part Number: WB2X8248
No Longer Available
ELEMENT BAKE - RB147 – Part Number: WG02F05395
This bottom oven bake element is designed for 30-inch electric ranges and ovens, delivering reliable and even heat for baking. Rated at 3000 watts and operating on 240 volts, it helps resolve common i...
No Longer Available
Door Latch Solenoid – Part Number: WB24X5097
No Longer Available
UNKNOWN – Part Number: WB24X5164
No Longer Available
HANGER – Part Number: WB2X3165
$39.63
Special Order
GASKET – Part Number: WB2X3163
No Longer Available
WASHER – Part Number: WB1X5573
$15.26
Special Order
SWITCH SOLENOID – Part Number: WB24X5235
No Longer Available
CAP HANDLE – Part Number: WR12X320
$31.05
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for J37SWK-1

Viewing 3 of 3
Element will not heat
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Will not program
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ryan from Henderson, NV
Parts Used:
WB21X158
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
oven temperature too low
After ordering the proper part with the help of the phone customer service tech, I moved the stove from the wall, unclipped the connector, removed the two screws holding the sensor in place, and removed it. Reversed the above to put it back, and the oven holds perfect temperature.
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Clarence from Norwich, NY
Parts Used:
WB21X158
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
oven would not come up to temperature
Removed sensor from back wall of oven by removing 2 screws from flange. I could not pull the wire-nut connections out through the small hole and thought I would have to pull the whole oven out of the wall to acess the connections from the back so instead I clipped the wires close to the old sensor and connected the new sensor with the sma ll wire nuts provided, then enlarged the hole in the oven wall, being careful not to pinch the wires then pushed the wire nuts and extra wire back through the hole and put the screws back in the flange.
Read less
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from FAIRFIELD, OH
Parts Used:
WB20T10024
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Oven meat probe broken
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported.
- works great. tested it....snaps in, reads correctly, snaps out.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More