Models > 18471-1

18471-1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 18471-1

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This end cap can be used for either the left or right side.
In Stock
Order now and your part arrives by Mar 19
Screws not included.
In Stock
Order now and your part arrives by Mar 19
If your cooktop isn?t heating evenly or won?t turn on, this 6-inch radiant heating element might be the fix. It sits under the glass surface and glows red when it?s working, giving you steady heat for...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
No Longer Available
End caps are sold separately.
No Longer Available
No Longer Available
$102.95
Special Order
Special Order
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 18471-1

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Frank from St Augustine, FL
Parts Used:
WB30X44826
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Coil Burned Out
Open lid,un screw coil,pop in new coil snap holders in place,then cook a steak
62 of 93 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LANCE from ORELAND, PA
Parts Used:
WB30X44826
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Heating element burned out.
Unplugged range. Opened oven door and removed two screws from top of oven opening. Lifted oven top and propped up
with a 2 x 3.Unscrewed the two screws that were holding
41 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JoAnn from Auburn, WA
Parts Used:
WB2X2058
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
19 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!