Models > GRMF2150ZC1

GRMF2150ZC1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GRMF2150ZC1

Viewing 5 of 5
BACKGUARD Diagram and Parts List for General Electric Range
BACKGUARD
BODY Diagram and Parts List for General Electric Range
BODY
COOKTOP & DRAWER Diagram and Parts List for General Electric Range
COOKTOP & DRAWER
DOOR Diagram and Parts List for General Electric Range
DOOR
WIRING DIAGRAM Diagram and Parts List for General Electric Range
WIRING DIAGRAM
Keep searches simple, eg. "belt" or "pump".
Door Hinge Receptacle – Part Number: 318328010
Sold individually.
No Longer Available
Screw – Part Number: 5303288565
$9.48
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
In Stock
Hex Nut – Part Number: 5303013272
$14.79
Special Order
SUPPORT – Part Number: 5304403015
$25.29
In Stock
RACK – Part Number: 318345201
$67.84
Special Order
SCREW – Part Number: 5303300265
$12.00
In Stock
ELEMENT BAKE 2400 W - 2118181050 – Part Number: WG02F05459
No Longer Available
SCREW – Part Number: 5303211311
$12.02
Special Order
HOUSING – Part Number: 318222400
$42.54
Special Order
CLIP-THERMO – Part Number: WB2X9027
No Longer Available
SCREW – Part Number: 5304415832
$11.44
Special Order
MEDALLION – Part Number: 5303301461
$54.43
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GRMF2150ZC1

Viewing 2 of 2
Element will not heat
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Douglas from Colrain, MA
Parts Used:
318328010
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
had no instructions on how to remove old door hinge recepticle..
After trying to unscrew a plate on the side, I found that would NOT work at all, the side panel of the stove was behind it. I found a tab that cut-out on 3 sides just above the location of the recepticle, and simply bent that tab out, pulled out the old recepticle, slid in the new recipticle, and put in the screws and then bent back the tab. It was sooo easy once I found that. I repeated in on the other side.
Read less
Was this instruction helpful to you?
Thank you for voting!
View More