The charcoal filter in your microwave is used to remove cooking odors from the air as they circulate through the microwave vent. The filter will last between six months to one year, depending on how o...
This is a genuine OEM 40-watt light bulb for your microwave. The bulb is used inside the microwave and lights up when the door is open or when operating. The bulb can also be found underneath the micr...
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part ...
This 20A, 125V fast-blow glass fuse protects your microwave from power surges and electrical faults. It fits select models from GE, Hotpoint, and Frigidaire and measures approximately 6x30mm. Replace ...
This door interlock switch stops the microwave from running when the door is open. It replaces older versions and helps restore safe, reliable operation. Installation requires unplugging the appliance...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
November 17, 2023
Microwave main circuit breaker trips when door is opened. I need to now what switch to replace and it's part number.
For model number PVM9005EJ3ES
Hi Roy,
Thank you for your question. If your microwave trips the breaker when the door is open, it may share the same circuit as some other appliances. Try plugging the microwave into another outlet that has its own dedicated circuit to see if it trips the breaker, if does not you will have to make sure it is plugged into an outlet with its own dedicated circuit. If it does trip the breaker, then the issue is with the microwave and you will need to check and see which part is causing the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
There are videos on YouTube on how to do this but there are a couple of things I’m going to recommend. Color code your plugs when you take the main control panel off, be patient when removing the screws on the thermal fuse use a 45 degree screwdriver but replace the screws with a small hex head self tapper screw for next time. The differ
... Read moreence between these two lookalike fuses is that one is for the fan and the other one is the thermal there’s a price difference and volts so read the back of the bad fuse. These guys are great man and thank you for helping me out.
