Models > PB970SP6SS

PB970SP6SS General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PB970SP6SS

Viewing 7 of 7

Manuals & Guides for PB970SP6SS

Click to download
Keep searches simple, eg. "belt" or "pump".
If your oven is running hot, not heating evenly, not coming up to temperature, or just not heating up at all, there may be an issue with the temperature sensor. This sensor is usually found in the bac...
In Stock
Order now and your part arrives by Mar 19
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
In Stock
Order now and your part arrives by Mar 19
This dual radiant element provides heat from beneath the cooktop and is 9 inches in diameter. It’s the larger burner and is ideal for bigger pots and pans. If your element isn’t heating, replacing it ...
In Stock
Order now and your part arrives by Mar 19
$39.57
This temperature sensor detects the temperature within the oven cavity.
In Stock
Order now and your part arrives by Mar 19
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main ...
In Stock
Order now and your part arrives by Mar 19
Must buy bulb locally as per manufacturer.
In Stock
Order now and your part arrives by Mar 19
Sold individually.
In Stock
Order now and your part arrives by Mar 19
This 12-inch haliant surface element fits under the glass top of flat cooktops and ranges, providing heat to the cooking surface. It’s sold individually and replaces a non-heating burner. To install, ...
In Stock
Order now and your part arrives by Mar 19
$14.65
This screw is sold individually.
In Stock
Order now and your part arrives by Mar 19
$48.36
Sold Individually.
In Stock
Order now and your part arrives by Mar 19
$58.09
This oven door gasket helps seal in heat, ensuring even cooking and better energy efficiency. Made from durable rubber and fiberglass, it fits securely around the oven opening and is easy to install w...
In Stock
Order now and your part arrives by Mar 19
This switch controls the stove top surface burner.
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for PB970SP6SS

Viewing 7 of 7
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Peter from stamford, CT
Parts Used:
WB21X22134
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Oven would go in to a F2 Error
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
148 of 226 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sean from Highlands Ranch, CO
Parts Used:
WB23T10015
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Oven was not coming up to temperature
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wal l. Overall, a very easy repair once you get the oven out.
56 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrea from ORLANDO, FL
Parts Used:
WB30T10133
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
9" Radiant Element did not heat up.
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
46 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!