Models
>
JGBP28GEJ1
JGBP28GEJ1 General Electric Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JGBP28GEJ1
Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
Sold Individually. This knob accepts a D-shaped shaft.
No Longer Available
$37.80
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. T...
In Stock
In Stock
In Stock
This igniter is lighted by the spark switch to produce a flame to ignite the oven.
In Stock
This part creates the spark that lights the gas and starts the burners.
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
$33.66
This drawer glide is sold individually. It may not resemble the original glide, but it will fit and function the same.
Special Order
This drawer glide is located in the lower drawer section of the oven.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JGBP28GEJ1
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Winnie from New York, NY
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Gas stove knob was broken
The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maurice from Overland Park, KS
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vicjki from Houston, TX
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old knob cracked, duh, after 20+ yrs!
Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!
Was this instruction helpful to you?
Thank you for voting!