Models
>
JBP19BY4
JBP19BY4 General Electric Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JBP19BY4
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 30
$16.35
Keep your range clean and protected with this 8-inch burner drip bowl, which fits beneath the burner to catch spills and debris. Its chrome finish adds a polished appearance and helps guard against ru...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
This oven handle end cap connects to your oven door handle, and acts as the joint that connects it to the oven door. This part is made of black plastic and can be used as the left or right-side end ca...
In Stock
Order now and your part arrives by Mar 30
This Y-frame six inch surface burner element has five turns and a metallic center medallion.
In Stock
Order now and your part arrives by Mar 30
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
On Order
$73.24
This bake element has push-on wire terminals and the feet to keep it elevated from the bottom of the oven.
In Stock
Order now and your part arrives by Mar 30
On Order
In Stock
Order now and your part arrives by Mar 30
$78.55
This genuine oven door handle replaces broken or missing handles on select GE, Hotpoint, and Kenmore ranges. Made from durable material and typically black in finish, it provides a secure grip and res...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JBP19BY4
Viewing 4 of 4Element will not heat
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
How to fix it
Little to no heat when broiling
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Alton from Marshall, TX
- Parts Used:
- WB44X10009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Bottom heat element
Turn the breaker off to the oven.Removed both wire racks,using a 1/4 nut driver unscrewed the old element.The flashlight was so I could see inside the oven.Having removed the two screws ,the old element came right out.With my needle nose pliers removed the wires one at a time,replacing them on the new element as they came off.Replaced the
... Read more
two screws holding the element ,replace my wire rack, turned the breaker back on.As for the price for the part ,it was less than a service call from a repairman,which would not have included the part.
Read less
Was this instruction helpful to you?
Thank you for voting!
Replacement of Coils
Removed by slightly wiggling out of the coupling. No tools needed, seriously, (and I'm a contractor). Basically, pull out and snap back in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Brooksville, FL
- Parts Used:
- WB44X10009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Botton element melted in half.
First I turned off the circut breaker. Then removed the two wire racks. Then I removed the two 1/4" hex head screws holding the rear of the element in place. Pulled the element out far enough to remove the two wires. Discarded the old element. Installed the new element in the reverse order and turned the breaker back on. Took no more tha
... Read more
n 10 minutes. Ordering the part was easy. The diragrams with measurements of the part made it easy to insure that I was getting the right part. I'm sure I save myself at least a $65 plus service call. Not to mention a mark up on the part itself. I will use this website in the future if needed. Thanks
Read less
Was this instruction helpful to you?
Thank you for voting!