JGHC60GEN7 General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Winnie from New York, NY
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Gas stove knob was broken
The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maurice from Overland Park, KS
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vicjki from Houston, TX
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old knob cracked, duh, after 20+ yrs!
Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john noel from simi valley, CA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stove is old and control knobs break
just pushed on the new control knob, no tools it was quick and eacy with the right part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GENE from HEBRON, OH
- Parts Used:
- WB2X10016
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Avon, OH
- Parts Used:
- WB32X90
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing old drip pans
Our very old GE gas stove looked good except for the drip pans. I ordered all four and they arrived the next day. The price for the pans was very reasonable, and of course, they were very easy to replace. My wife looked at the stove and said the stove looked new. I love those inexpensive jobs that result in a good looking finished project.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Flanders, NJ
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Oven Igniter DEAD
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Perry from Flushing, NY
- Parts Used:
- F26T8-CW-4
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
remove and replace
very easy remove the bad bulb install the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doris from Redwood City, CA
- Parts Used:
- WB3X459
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
timer knobs missing
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.
Two of the knobs fit perfectly.
The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
Two of the knobs fit perfectly.
The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeanne from White Plains, NY
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
inside Control Knob broke off
took off the old knob replace it with the new knob
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eric from Diamond Bar, CA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original top burner control knob broke off
The repair in my situation is very easy and simple. Just push new control knob into the valve and it's done. I am pleased with my order and I received it sooner than I expected.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Springfield, VA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The tube on the old knob snapped.
The new knob was the exact part. It slipped right on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Boston, MA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was broken
Changed the knob. Just like that, it worked like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danial from HILLSBORO, TX
- Parts Used:
- F26T8-CW-4
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Fluorescent lamp bulb
Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- christine from new york, NY
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven would not light
Removed old ignighter and replaced it with the new one. No brainier. Took longer to find the correct part, mine had three wires, most are just two.
Was this instruction helpful to you?
Thank you for voting!