Models > JSP31GP1

JSP31GP1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JSP31GP1

Viewing 4 of 4
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Keep searches simple, eg. "belt" or "pump".
Trim Ring - 6 Inch – Part Number: WB31X5013
$13.95
This trim ring is an authentic OEM replacement part for your range. It serves as a decorative trim to the drip bowls found under the burner elements. The part will need to be replaced if it has become...
In Stock
Order now and your part arrives by Jul 5
Trim Ring - 8 Inch – Part Number: WB31X5014
$17.44
This 8-inch trim ring is a genuine OEM replacement part for your range. It sits around the surface burner elements for the style of ranges with low rise tilt lock burners. You may need to replace the ...
In Stock
Order now and your part arrives by Jul 5
Porcelain Drip Pan - 6" – Part Number: WB32X5059
No Longer Available
Large Surface Burner Switch - 2350W 240V – Part Number: WB23K5027
$114.28
Designed for 8-inch surface burners, this heat control switch regulates temperature and turns the burner on and off using a push-to-turn style. It operates at 240 volts and supports a range of GE and ...
In Stock
Order now and your part arrives by Jul 5
Porcelain Drip Bowl - 8" – Part Number: WB32X5060
$29.98
In Stock
Order now and your part arrives by Jul 5
Switch – Part Number: WB24T10147
$27.95
This light switch is controlled by opening and closing the oven door
In Stock
Order now and your part arrives by Jul 5
Door Lock and Switch Assembly – Part Number: WB49T10020
$170.80
In Stock
Order now and your part arrives by Jul 5
Inner Door Glass – Part Number: WB56X1907
No Longer Available
OV Door GLASS Assembly-WHITE – Part Number: WB57K5182
No Longer Available
Manifold End Cap – Part Number: WB36K5135
$31.05
Special Order
DOOR LOCK PLAT – Part Number: WB34K5228
$80.28
Special Order
LIMIT SWITCH-APPARANCY – Part Number: WB24K5086
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for JSP31GP1

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing
How to fix it
Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 8 Inch

Replacing the Trim Ring - 8 Inch

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from Albuquerque, NM
Parts Used:
WB24T10147
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Convection oven fan and door light not working
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)

Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he x head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.

Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Read less
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
anthony from maumelle, AR
Parts Used:
WB23K5027
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
uncontrollable heat - would not cycle off
Turn circuit breaker off.Raise up cook top and remove 6 screws that hold catch pan in place.move 3 screws that hold switch cover panel [2 sections]in place. Pull off knob for bad switch and remove 2 screws.Pull off each of the 5 wire terminal clips by removing one at a time and replacing that one on the new switch control to assure correc t placement.Reinstall switch cover panel and catch pan.
Read less
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eugene from Hilton Head, SC
Parts Used:
WB24T10147
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Burnt Smell
Unplugged the Range and removed the two screws holding down the cook top. You do not need to remove the vent chamber at the rear of the range since the top lifts up about 4 inches. This should be enough room to get your hand onto the plug going to the door switch. Pull off the plug and remove the swich. Pop in the new one, put on the plug, reinstall the two screws and you are done!

Read the thread on "burnt smell" and DO NOT assume it is a burned out element. Follow your nose!!
Read less
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More