Models > GGS600AV1DS > Instructions

GGS600AV1DS General Electric Range - Instructions

Jump to:

All Instructions for the GGS600AV1DS
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
George from PALM COAST, FL
Parts Used:
WB25T10102
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
A burnt out bulb
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carl from MENIFEE, CA
Parts Used:
WB25T10102
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burnt out lamp bulb
Remove oven light lens cover, remove the bulb and replace it with a new one.
5 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GGS600AV1DS
1 - 2 of 2