PGP7030SL2SS General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- felicia from clayton, NC
- Parts Used:
- WB03X29354
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
One of the Cook top Control Knobs broke off.
Purchased another Cooktop Control Knob assembly and pulled the old knob off carefully and replaced with the new Control Knob Assembly. It was very easy and quick ! Thanks FB
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- terry from NAPLES, FL
- Parts Used:
- WB13X29294
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Electrode would produce spark to lite burner
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB
1. Shut off gas and unplug electrical plug
2. Remove all stove grates and turn on knobs
3. Remove all burner covers
4. Remove all screws [three for each burner]
5. Remove two screws near front by removing rubber grate grommets
6. Carefully Lift off stove cover and set aside
7. Remove shield near back of stove top. This exposes all burner wires
8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct.
9. Reassemble in reverse order of steps 1-8
HAVE A NICE DAY
1. Shut off gas and unplug electrical plug
2. Remove all stove grates and turn on knobs
3. Remove all burner covers
4. Remove all screws [three for each burner]
5. Remove two screws near front by removing rubber grate grommets
6. Carefully Lift off stove cover and set aside
7. Remove shield near back of stove top. This exposes all burner wires
8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct.
9. Reassemble in reverse order of steps 1-8
HAVE A NICE DAY
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pauline from AKRON, OH
- Parts Used:
- WB03X29354
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
replacement knobs
The knobs arrived beautifully packed and fit perfectly. They needed replaced because I had put old ones in top rack of dishwasher and the finish, which is some kind of foil like paper, peeled off. I have always put knobs in dishwasher and never had a problem
Was this instruction helpful to you?
Thank you for voting!