Models > CGP60302T2S1

CGP60302T2S1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for CGP60302T2S1

Viewing 2 of 2
Control Panel And Cooktop Diagram and Parts List for General Electric Range
Control Panel And Cooktop
Gas And Burner Parts Diagram and Parts List for General Electric Range
Gas And Burner Parts
Keep searches simple, eg. "belt" or "pump".
Range Surface Burner Cap, Small – Part Number: WB16X28654
$18.95
In Stock
Order now and your part arrives by Jul 5
Screw – Part Number: WB1M1
$14.16
Sold Individually.
In Stock
Order now and your part arrives by Jul 5
BURNER – Part Number: WB16X24722
$52.50
In Stock
Order now and your part arrives by Jul 5
SEAL CNTL (Black) – Part Number: WB04T10042
$22.91
In Stock
Order now and your part arrives by Jul 5
Burner – Part Number: WB16X24724
$38.56
This medium gas surface burner provides steady, even heat for everyday cooking tasks such as sautéing, simmering, and boiling. Made from durable, high-heat-resistant materials, it restores proper flam...
In Stock
Order now and your part arrives by Jul 5
Burner – Part Number: WB16X24721
$33.20
In Stock
Order now and your part arrives by Jul 5
SCREW – Part Number: WB1X536
$17.95
In Stock
Order now and your part arrives by Jul 5
Economic Nut – Part Number: WB01K10037
$15.26
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
In Stock
Order now and your part arrives by Jul 5
Burner – Part Number: WB16X24723
$48.35
In Stock
Order now and your part arrives by Jul 5
GRATE Assembly LGE – Part Number: WB31X29298
$97.29
In Stock
Order now and your part arrives by Jul 5
CLIP IGNITER V2 – Part Number: WB02X24976
$18.54
In Stock
Order now and your part arrives by Jul 5
Surface Burner Base - Left Front – Part Number: WB02X24727
$33.20
In Stock
Order now and your part arrives by Jul 5
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Drury from Newport, NH
Parts Used:
WB16X24722
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Hi output burner never worked correctly. Burned unevenly and created soot.
So for years have been struggling with this burner. Technicians could not figure out the problem. Then one day, I noticed that the top cover did not sit properly on the burner. Lifted up the burner with the cover on it and noticed that the burner itself was warped and deformed. The top cover never sat evenly on the burner. Ordered a new burner and put it in and presto. The burner work properly for the first time since we bought the stove. So, check the burners and see if the top cover sits evenly on the burner.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More