Models
>
JGP5036DL2BB
JGP5036DL2BB General Electric Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JGP5036DL2BB
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
$38.56
This medium gas surface burner provides steady, even heat for everyday cooking tasks such as sautéing, simmering, and boiling. Made from durable, high-heat-resistant materials, it restores proper flam...
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
$15.26
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
In Stock
Order now and your part arrives by Mar 29
On Order
In Stock
Order now and your part arrives by Mar 29
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- terry from NAPLES, FL
- Parts Used:
- WB13X29294
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Electrode would produce spark to lite burner
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB
1. Shut off gas and unplug electrical plug
2. Remove all stove grates and turn on knobs
3. Remove all burner covers
4. Remove all screws [three for each burner]
5. Remove two screws near front by removing rubber gra ... Read more te grommets
6. Carefully Lift off stove cover and set aside
7. Remove shield near back of stove top. This exposes all burner wires
8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct.
9. Reassemble in reverse order of steps 1-8
HAVE A NICE DAY
1. Shut off gas and unplug electrical plug
2. Remove all stove grates and turn on knobs
3. Remove all burner covers
4. Remove all screws [three for each burner]
5. Remove two screws near front by removing rubber gra ... Read more te grommets
6. Carefully Lift off stove cover and set aside
7. Remove shield near back of stove top. This exposes all burner wires
8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct.
9. Reassemble in reverse order of steps 1-8
HAVE A NICE DAY
Read less
Was this instruction helpful to you?
Thank you for voting!