Models > JGSP21GER1WH

JGSP21GER1WH General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JGSP21GER1WH

Viewing 5 of 5
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Section Diagram and Parts List for General Electric Range
Section
Keep searches simple, eg. "belt" or "pump".
Door Lock and Switch Assembly – Part Number: WB49T10020
$151.12
In Stock
Order now and your part arrives by Jun 8
Inner Door Glass – Part Number: WB56X1907
No Longer Available
Limit Switch – Part Number: WB24K5085
$57.30
In Stock
Order now and your part arrives by Jun 8
CLOCK/OVEN CONTROL (ALSO ORDER CLOCK PLATE ITEM 18 OR 18A) – Part Number: WB27K5187
No Longer Available
OV Door GLASS Assembly-WHITE – Part Number: WB57K5182
No Longer Available
Manifold End Cap – Part Number: WB36K5135
$31.05
Special Order
TUBE & ORIFICE Assembly – Part Number: WB28K5025
No Longer Available
Fan Limit Switch – Part Number: WB24K5041
$60.49
Special Order
VENT TRIM INSULATION – Part Number: WB35K5037
$52.50
Special Order
GLASS OV Door INNER – Part Number: WB57K5102
No Longer Available
LOWER FRONT PANEL – Part Number: WB56K5017
$84.30
Special Order
INSULATION BACK BOTTOM – Part Number: WB35K5035
$55.18
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Nopadon from Arden, NC
Parts Used:
WB27K5187
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Heat come up about 150 degrees and stop.
I removed the whole unit out by pulled the plug at the bottom and pulled the unit out, unplug the power cord , turn the gas line off, separate gas line from the stove. I pulled the unit out to have more room for me to work on it. I took the top part out and right hand side panel out. Now you can see the old clock/oven control (ERC II C). I wrote down the color of wire to the lettering on the controller board. I pulled the wires out from the old one. Then I put wires back to the new clock/oven control. I reinstalled and put the gas line back and plug in power cord. I test the unit. It is work very fine.
Read less
20 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More