Models > JGBP27GEH3

JGBP27GEH3 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JGBP27GEH3

Viewing 2 of 2
30" GAS FREESTANDING RANGE - ELECTRIC IGNITION Diagram and Parts List for General Electric Range
30" GAS FREESTANDING RANGE - ELECTRIC IGNITION
30" GAS FREESTANDING RANGE - ELECTRIC IGNITION Diagram and Parts List for General Electric Range
30" GAS FREESTANDING RANGE - ELECTRIC IGNITION
Keep searches simple, eg. "belt" or "pump".
Drip Pan - 8 inch – Part Number: WB32X84
No Longer Available
Broiler Pan - Large – Part Number: WB48X10056
$30.07
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. T...
In Stock
Clock Knob Kit - 3 Pack - Chrome – Part Number: WB3X459
No Longer Available
Leveling Leg – Part Number: WB2X8248
No Longer Available
Ignition Switch – Part Number: WB24X379
This part creates the spark that lights the gas and starts the burners. When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
IGNITER-MODULE BOARD – Part Number: WB21X5265
No Longer Available
REGULATOR – Part Number: WB21X465
No Longer Available
Burner Igniter – Part Number: WB2X4306
Usually used for Broil.
No Longer Available
HINGE Assembly Right Hand – Part Number: WB14X45
No Longer Available
HINGE Assembly Left Hand – Part Number: WB14X44
No Longer Available
DISCONTINUED – Part Number: WB32X83
No Longer Available
IGNITER – Part Number: WB2X9366
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Gary from Riverside, CA
Parts Used:
WB24X379
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Burner would not light
Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doris from Redwood City, CA
Parts Used:
WB3X459
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
timer knobs missing
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.

Two of the knobs fit perfectly.

The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from Muscatine, IA
Parts Used:
WB14X45, WB14X44
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven door was hard to open
Removed 2 screws and unhooked the spring. then hooked the spring back up installed 2 screws and I was done. Very easy
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More