Models > 30-7871-00

30-7871-00 ((01)) Frigidaire Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Burner Grate – Part Number: 316055800
$37.41
Sold individually.
In Stock
Gas Spark Ignition Switch – Part Number: 316035200
$74.27
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner
In Stock
Flat Style Oven Igniter – Part Number: 5303200508
This flat style universal gas oven igniter is 5.53 inches long and comes with a wire harness connector and a bracket. Its amperage range is between 3.2 and 3.6 amps. Use this igniter with your Frigida...
No Longer Available
CLEANER – Part Number: 316119700
No Longer Available
KNOB-CLOCK – Part Number: 316029008
$34.69
Special Order
VALVE – Part Number: 5303288190
$114.72
Special Order
KNOB – Part Number: 358T142P100
$88.37
Special Order
ALMOND PAINT C6 TOU – Part Number: 5305510269
$7.75
Special Order
BISQUE PAINT C6 – Part Number: 5304490738
$25.18
Special Order
RNGGASCNCTR C06 5/8 – Part Number: 5304490730
$38.05
Special Order
DISCONTINUED – Part Number: 148T149P12
No Longer Available
DISCONTINUED – Part Number: 233T045P03
$75.80
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 30-7871-00

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donald from Middle Village, NY
Parts Used:
316035200
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Two top burners would not light, defective switch
Warning- we found a lot of bare wires in this stove, check your wires before replacing the bad switches. I lifted the top, disconnected the power, pulled off the knobs, unscrewed the switch for the back light, removed seven screws to finally get the front panel off. Once you have the front panel off, changing the swich takes less than a m inute. The switches just slide off the gas valve stems. Instructions show how to line up the new D-shaped switch mechanism to match the D-shaped shaft. Gently pull the two wires off the old switch and slide onto the new switch. Then put the panel back.
Read less
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sue Z from Los Angeles, CA
Parts Used:
316055800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grates were old and rusted and scratching the bottom of my pots
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Len from Corry, PA
Parts Used:
316035200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Switch plate cracked.
This hard to find GE part number was easy to find at PartSelect.com. The GE dealer said the part was permanently out of stock. Lift lid and remove a few screws and pull off two wires and replace switch plate and reconnect everything. Good to go.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More