Models > FCRG3051BSE

FCRG3051BSE Frigidaire Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FCRG3051BSE

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. Th...
In Stock
Order now and your part arrives by Jun 20
This LP Conversion kit, complete with instructions, allows you to convert your natural gas range to use liquid propane. Easy to install, it ensures optimal performance of your appliance
In Stock
Order now and your part arrives by Jun 20
In Stock
Order now and your part arrives by Jun 20
This gas range bake burner tube and orifice assembly delivers gas from the appliance to the bake burner, ensuring steady and reliable heat during oven operation. Designed to regulate proper gas flow f...
In Stock
Order now and your part arrives by Jun 20
$48.21
This probe is a replacement sensing component used to monitor internal temperatures or operating conditions. It is commonly replaced when readings become inaccurate or system performance is affected by faulty sensing.
In Stock
Order now and your part arrives by Jun 20
$7.60
In Stock
Order now and your part arrives by Jun 20
In Stock
Order now and your part arrives by Jun 20
$59.62
In Stock
Order now and your part arrives by Jun 20
$81.02
In Stock
Order now and your part arrives by Jun 20
On Order
$16.35
Special Order
In Stock
Order now and your part arrives by Jun 20

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FCRG3051BSE

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Colin from MORGANTOWN, WV
Parts Used:
808608802
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Stove pilot not clicking on any burner, oven works fine
Unplug the range. Remove screw to Take of the back panel on upper right corner. Unclip the old spark module, unplug the wires with the needle nose pliers and plug them into the new spark module same as the old module. Clip it on. Replace the back panel.
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!