Models > FCFE3062ABA

FCFE3062ABA Frigidaire Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
In Stock
Order now and your part arrives by Mar 19
$70.33
Dual Radiant Surface Element
In Stock
Order now and your part arrives by Mar 19
$80.63
If your oven door handle is wobbly, cracked, or just looking worn out, this black replacement handle is a simple fix. It gives you a sturdy grip for opening and closing the oven and helps keep things ...
In Stock
Order now and your part arrives by Mar 19
This range terminal block kit provides a secure connection point between the household power cord and the appliance’s internal wiring. It helps distribute electrical power safely and reliably to the r...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
$56.05
Measurements: approximately 22 7/8" x 16 1/4"
In Stock
Order now and your part arrives by Mar 19
$45.27
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
$7.30
In Stock
Order now and your part arrives by Mar 19
$20.95
Special Order
Special Order
NUT
$19.90
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FCFE3062ABA

Viewing 2 of 2
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Lori from Winter Haven, FL
Parts Used:
318178110
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
70 of 97 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
German from SELLERSBURG, IN
Parts Used:
5304533520
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Center of dual burner was broken
Removed screws on the sides and front.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ruth from MORGANTOWN, WV
Parts Used:
318178110
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!