Models > E30GF74TPSB

E30GF74TPSB Frigidaire Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for E30GF74TPSB

Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
CAP
$24.35
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges ...
In Stock
In Stock
$48.85
In Stock
CAP
$30.07
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
In Stock
This is also called the heat barrier glass.
In Stock
$11.77
This is a screw for your range or microwave. This part is sold individually. It has a pan head, a pointed tip for use with sheet metal, and an x-shaped drive. This screw is a #8, has 18 threads to the...
In Stock
CAP
$35.49
Sold individually.
In Stock
Sold individually.
In Stock
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. Th...
In Stock
Sold individually.
In Stock
$77.98
This valve automatically cuts off the flow of gas at a certain pressure.
In Stock
$18.22
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for E30GF74TPSB

Viewing 6 of 6
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Gas smell
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mitch from Fernandina Beach, FL
Parts Used:
5304503232
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Cracked oven door inner glass
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
74 of 110 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
stephen from garden grove, CA
Parts Used:
5304503232
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Broken glass interior oven door
Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. Th e biggest challenge was researching and understanding what part(s) were needed and how to replace them. It seemed liked a lot of work doing the research however it sure beat a $350 repair bill. It cost me $90 and about 1 1/2 hours of total time. Oven works better than ever, thanks parts select for the part(s) and diagram(s) ...
32 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Houma, LA
Parts Used:
318228310
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lens missing for burner "on" indication
Lifted the oven top, removed the controls cover, slipped the lens into the hole and slid the light holder device onto the lens
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!