Models > KD835ADK2

KD835ADK2 Frigidaire Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bake Element - 240V – Part Number: 5303051519
$38.06
If your oven has little to no heat, there may be an issue with the bake element. The bake element is found in the bottom of the oven cavity and is used to supply the heat used for cooking and baking. ...
In Stock
Order now and your part arrives by Mar 19
Broiler Pan Grate Insert – Part Number: 5304494997
This includes pan and insert.
No Longer Available
Broil Element – Part Number: 5303051516
$127.78
This fully open fixed oven broil element carries 240 volts and 2750 watts.
In Stock
Order now and your part arrives by Mar 19
PAN-BURNER – Part Number: 318138500
No Longer Available
Porcelain Drip Pan - Small – Part Number: 318138501
No Longer Available
HINGE – Part Number: 5308003183
$72.37
Special Order
RACK – Part Number: 5303015714
No Longer Available
Gasket – Part Number: 5303051704
This oven door gasket prevents heat from escaping the oven cavity when in use.
No Longer Available
GLASS – Part Number: 903023-9010
No Longer Available
GLASS – Part Number: 5303051713
No Longer Available
CLOCK-DIGITAL/SILVE – Part Number: 5303934089
$238.00
Special Order
MAIN TOP – Part Number: 5303051802
$457.47
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for KD835ADK2

Viewing 6 of 6
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing
How to fix it
Replacing the Broiler Pan Grate Insert

Replacing the Broiler Pan Grate Insert

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Christopher from North Salt Lake, UT
Parts Used:
5303051519
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Baking Heating Element Burned Up
Used a screw driver with a socket head to remove the two hex head screws holding the old element. Pulled the old element forward until the two wire attachements were visable. The wires were attached with a simple tab connector. Removed the wires from the element. Attached wires to new element slide the element and wires back into wall of oven and replaced screws. Done!
Read less
193 of 202 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joseph from washington, PA
Parts Used:
5303051519
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
blown bake element
Removed the two screws that hold the element in place at the rear of the oven.Unplug each prob,you may need pliers as they can be a little tight.Reconnected the new element.Keep the old screws.New element does not come with screws.Always unplug range when doing repairs.
59 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Flatwoods, KY
Parts Used:
5303051519
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Element went out in 20+ year old oven
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Replaced the element and put back in place. Took about 10 minutes. Repair part came in 2 days. Very awesome website!
28 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More