Models
>
ER48D
ER48D Dacor Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and wo...
No Longer Available
$38.79
This 12-volt, 20-watt halogen bulb uses a G4 bi-pin base to restore interior or task lighting in compatible cooking appliances. Its clear light makes the cooking area easier to see during use. Replace...
Special Order
In Stock
Order now and your part arrives by Sep 25
$42.00
A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrod...
In Stock
Order now and your part arrives by Sep 25
Special Order
Special Order
Special Order
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brandon from Atlanta, GA
- Parts Used:
- DE81-10123A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Foil burned onto bake glass
A foil oven liner was accidentally placed on the bake glass which covers the heating element. This is a very simple repair with the correct size allen wrench. Unscrew the screws to the liner holding the bake glass in place, take out the old bake glass, put in the new one and screw the liner back in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from MCKINNEY, TX
- Parts Used:
- DE81-02331A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Was this instruction helpful to you?
Thank you for voting!