Models > ERSD48NG

ERSD48NG Dacor Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Halogen Bulb – Part Number: DE81-05142A
$42.85
This genuine OEM halogen bulb provides bright, heat-resistant interior lighting for select wall ovens and ranges, making it easy to check cooking progress. Rated at 10 watts and 12 volts with a G4 bi-...
Special Order
Service O-Ring Burner – Part Number: DE81-08744A
$51.43
This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a sea...
Special Order
Brass Nut – Part Number: DE81-07824A
$14.16
In Stock
Order now and your part arrives by May 15
SVC-FILTER CONVECTION OVEN;82891,DO130 – Part Number: DE81-04961A
No Longer Available
Screw Wafer – Part Number: DE81-02250A
$6.51
In Stock
Order now and your part arrives by May 15
Service Knob Epicure – Part Number: DE81-09529A
No Longer Available
SVC-ASSEMBLY WINDOW PACK 1 INC – Part Number: DE81-03804A
This is used in oven / range as a see through heat barrier
No Longer Available
Svc-Relay Board – Part Number: DE81-08448A
No Longer Available
SVC-THERMAL SW HI TEMP CUTOU;82987,DR30D – Part Number: DE81-03938A
$39.63
In Stock
Order now and your part arrives by May 15
Temperature Sensor Kit – Part Number: DE81-03937A
$143.65
This temperature sensor kit monitors operating temperatures and sends accurate readings to the control system. Designed for precision, it supports proper regulation and consistent appliance performance.
Special Order
Hot Surface Igniter – Part Number: DE81-07046A
$200.92
This hot surface igniter lights the burner by generating the high heat required for clean ignition. A worn igniter may glow weakly, delay ignition, or fail to start the burner entirely. Replacing it e...
On Order
Halogen Light Assembly – Part Number: DE81-04342A
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from CAMILLUS, NY
Parts Used:
DE81-08448A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
F2 Alarm and oven beeping
Replaced relay board
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sarah from FORT COLLINS, CO
Parts Used:
DE81-03937A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Temp sensor is failing
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.

I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from BUENA VISTA, CO
Parts Used:
DE81-04994A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More