Models > ERDE48LP

ERDE48LP Dacor Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Manuals & Guides for ERDE48LP

Click to download
Keep searches simple, eg. "belt" or "pump".
This genuine OEM halogen bulb provides bright, heat-resistant interior lighting for select wall ovens and ranges, making it easy to check cooking progress. Rated at 10 watts and 12 volts with a G4 bi-...
Special Order
No Longer Available
This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a sea...
Special Order
$14.16
In Stock
Order now and your part arrives by May 7
No Longer Available
No Longer Available
In Stock
Order now and your part arrives by May 7
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from MIAMI, FL
Parts Used:
DE81-06694A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Flame was not even all around.
Cleaned the brass ring and replaced the cap.
New brass rings may be an improvement too.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from CAMILLUS, NY
Parts Used:
DE81-08448A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
F2 Alarm and oven beeping
Replaced relay board
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from BUENA VISTA, CO
Parts Used:
DE81-04994A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!