Models > ER36D

ER36D Dacor Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and wo...
No Longer Available
This 12-volt, 20-watt halogen bulb uses a G4 bi-pin base to restore interior or task lighting in compatible cooking appliances. Its clear light makes the cooking area easier to see during use. Replace...
Special Order
This temperature sensor checks the heat inside the oven and sends the reading to the control board, the board uses this reading to keep the set temperature, replace the sensor if the oven heats too sl...
In Stock
Order now and your part arrives by Sep 25
In Stock
Order now and your part arrives by Sep 25
A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrod...
In Stock
Order now and your part arrives by Sep 25
Special Order
Special Order
Special Order
$246.65
Special Order
Sold individually.
No Longer Available
On Order

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Brandon from Atlanta, GA
Parts Used:
DE81-10123A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Foil burned onto bake glass
A foil oven liner was accidentally placed on the bake glass which covers the heating element. This is a very simple repair with the correct size allen wrench. Unscrew the screws to the liner holding the bake glass in place, take out the old bake glass, put in the new one and screw the liner back in place.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from MCKINNEY, TX
Parts Used:
DE81-02331A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!