Models > AKT3040E-PAKT3040E1

AKT3040E-PAKT3040E1 Amana Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Cooktop Cleaner – Part Number: W10355051
$17.76
Sold individually.
In Stock
Order within the next 9 hrs and your part ships today!
Radiant Surface Burner Element 1500W – Part Number: W10823699
$106.72
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OE...
In Stock
Order within the next 9 hrs and your part ships today!
Appliance Scraper – Part Number: WA906B
$10.79
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
In Stock
Order within the next 9 hrs and your part ships today!
Surface Infinite Switch – Part Number: WP74011243
$121.64
This is an OEM part sourced directly from Amana. This surface infinite element switch is commonly used in ranges and cooktops. This switch is designed to turn the surface element on and off, as well a...
In Stock
Order within the next 9 hrs and your part ships today!
Dual Element Infinite Control Switch – Part Number: 12002422
$119.64
In Stock
Order within the next 9 hrs and your part ships today!
CLEANER – Part Number: W10336909
$11.19
On Order
Screw – Part Number: WP488234
$9.13
This screw is sold individually. Size: 8-32 x 1/4 inch.
Special Order
ELMNT-SURF – Part Number: W10823708
$197.75
This is a 2000 watt / 240 volt surface element.
In Stock
Order within the next 9 hrs and your part ships today!
SCREW – Part Number: 74009538
$18.47
Special Order
Dual Burner Knob – Part Number: 31926603B
This knob is used for a dual burner and takes a double-flat shaft.
No Longer Available
Surface Ribbon Element with Limiter - Small – Part Number: WP32082801
This is an authentic OEM replacement part. This is a radiant surface element used on ranges and cooktops. It is a 6-inch element designed for use with the small burners on your cooktop. This surface r...
No Longer Available
Glass Cooktop - Black – Part Number: 7920P230-60
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for AKT3040E-PAKT3040E1

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Replacing the Radiant Surface Burner Element 1500W

Replacing the Radiant Surface Burner Element 1500W

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from Seneca, SC
Parts Used:
12002422
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Burner switch failed (full on, even in "lo")
Managed to reach down from the top, unscrew the old part, so I could remove from under the cooktop. Easy to trace the wires, and map them to the (slightly different) replacement. Works like a charm, and new part appears to be of higher quality than the old one.
21 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RICHARD from PARADISE, TX
Parts Used:
WP74011243
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Small burner full hot all the time.
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Re assembled and turned power on. Defective switch had stuck contacts making it full hot.
Read less
16 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from SLINGER, WI
Parts Used:
12002422
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers
#2 wire on old control was a tad short to attach to L1 on new control.
Made a short 1/4" female spade to 1/4"male spade jumper wire to solve the issue. Thank you for having a replacement part.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More