Models
>
ACS200E-P1133382NE
ACS200E-P1133382NE Amana Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for ACS200E-P1133382NE
Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
$47.20
This is a genuine OEM replacement part. This spark ignition electrode is what lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, it sits nex...
In Stock
In Stock
$5.36
This is an authentic OEM replacement part. The screw is most often used in the assembly of ranges, cooktops, and wall ovens. A common use for this screw is to hold the burner head in place. However du...
In Stock
Special Order
This is an authentic OEM replacement part. This top burner, also known as a surface burner, with electrode is designed for use with gas ranges and cooktops. This 9k burner head is medium in size. The...
In Stock
In Stock
$42.09
This is a genuine OEM Amana replacement part. This burner cap is designed for use with ranges and cooktops, it is part of the burner assembly. There are two reasons the burner cap is essential to the ...
Special Order
This black screw is well under an inch long, and is made of metal. It is used for many air conditioners, refrigerators, and ranges.
No Longer Available
This is an OEM part sourced directly from the manufacturer. The burner head the is main part of the burner assembly in your gas range and cooktop. The gas flows through the burner head and is lit by t...
No Longer Available
$7.74
This is a genuine OEM replacement part. This bolt is commonly used in the assembly of ranges, cooktops, and washers. This part is most often used as an electrode mounting crew, however we recommend yo...
Special Order
$54.18
This is an authentic OEM Amana replacement part. This surface burner cap is designed for use with cooktops and ranges. The surface burner cap has two main functions, the first is to protect the burner...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for ACS200E-P1133382NE
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- HUY from ALISO VIEJO, CA
- Parts Used:
- WPY0316773
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Friendswood, TX
- Parts Used:
- WPY0316773
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec
... Read more
trode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Livonia, MI
- Parts Used:
- WPY0315768
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Two of the four burners would not ignite when lighting the stove.
I thought the problem was with the ignitors/burners since they appeared to be worn. As it turned out, I needed the spark ignitor, which is a "brain box" located under the range cover. It connects all of the ignitor/burners and sends current to the ignitors to give it the "spark" to ignite the gas. It was really easy to replace.
Was this instruction helpful to you?
Thank you for voting!