Models
>
ACF3355AC-PACF3355AC1
ACF3355AC-PACF3355AC1 Amana Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
$47.20
This is a genuine OEM replacement part. This spark ignition electrode is what lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, it sits nex...
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
$92.32
This is an OEM part sourced directly from the manufacturer. This horizontal mount igniter is designed for use with ranges, it ignites the gas to light the oven burner. This igniter can be used as a ba...
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
$7.76
This is a multi-use frame screw that fits a variety of power tools and equipment. Follow installation instructions and safety practices provided in the manual by the manufacturer.
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
$5.42
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
This is a genuine OEM replacement part. This drawer wheel, also known as a drawer roller is commonly used with ranges. This is one of the rollers used in the drawer assembly; it ensures your opens and...
No Longer Available
$5.36
This is an authentic OEM replacement part. The screw is most often used in the assembly of ranges, cooktops, and wall ovens. A common use for this screw is to hold the burner head in place. However du...
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
This is an authentic OEM replacement part. This top burner, also known as a surface burner, with electrode is designed for use with gas ranges and cooktops. This 9k burner head is medium in size. The...
In Stock
Order within the next 1 hr and 0 mins and your part ships today!
The size of this burner cap is actually 2.5" to 2.75 inches in diameter.
No Longer Available
This is a genuine OEM replacement part. This double burner bowl is designed for used with cooktops and ranges. The burner bowl is found underneath the burner grate. This part is designed to fit around...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for ACF3355AC-PACF3355AC1
Viewing 5 of 5Will Not Start
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Gas smell
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sabrina from Mooresville, NC
- Parts Used:
- 814323
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
several grate pads fell out/lost /broke during cleaning
The only real issue was locating the proper adhesive to ensure that the new pads would not fall out. The small insert paper slip in the package noted that a RTV adhesive should be used. After much searching at the home improvement super store, I learned it would be found at an auto supply store. It is black, and is for high temp use. It i
... Read more
s available in a small tube for around $2.00. The RTV is usually used to make gaskets for heat/oil exposure in auto repair. I did have trouble removing a broken stub from a pad that had broken off in the hole. I used an awl to get what I could and push the rest into the hole deeper, then insert a new pad with along with the adhesive.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HUY from ALISO VIEJO, CA
- Parts Used:
- WPY0316773
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from plymouth, NH
- Parts Used:
- WP7432P136-60
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
The broiler would work but the stove would not lite. I saw the igniter getting to a glow on the broiler and lite but the stove it would not so I figured the igniter might be shot.
1st I opened door to stove and removed the wire racks. Then removed lower panel to get to igniter. Then I had to slide stove away from wall. Remove panel on back for accesss to wires. The new part had a plastic connector and the original just used wire nuts for the connection. So I cut off connector and stripped 1/2 inch of the end. Remov
... Read more
ed wire nuts from old igniter. Back into the oven removed 2 screws pulled out old igniter. Installed new igniter with 2 screws stuck wires through small hole to rear. Back around to back of stove. Connected wires with wire nuts.(I did not see any differnce in wires and dont think it matters) put everything back together and fires that baby up. I am gonna say 15-30 min job
Read less
Was this instruction helpful to you?
Thank you for voting!